manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 2 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 2

ii

Preface

Copyright

© 2001 by Canon, Inc. All rights reserved. 

This manual may not be reproduced in any form, in whole or part, 
without the prior written consent of Canon, Inc.

Trademark Acknowledgments

Adobe Photoshop is a registered trademark, and Adobe Photo Deluxe is a 
trademark, of Adobe Systems Corporation. 

Canon and BJ are registered trademarks, and MultiPASS, Bubble Jet, and 
ScanGear are trademarks of Canon, Inc.

Microsoft, Windows, Exchange, Outlook, and Outlook Express are 
registered trademarks of Microsoft Corporation.

OmniPage is a registered trademark of ScanSoft, Inc.

Pentium is a registered trademark of Intel Corporation.

All other trademarks identified herein are the property of their respective 
owners.

manual.book  Page ii  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments