Canon MultiPASS F30, Software User'S Manual, Page: 133 / 170

Chapter 7 Fine-tuning the MultiPASS Suite 127
❏
Remote Receive
Click so that you can set the printer, from a telephone extension, to
receive a fax if an incoming call is ringing on the printer. If you select
this option, you must assign a remote identification number that
signals the printer to receive the fax.
❏
Remote Identification Number
If the Remote Receive option is selected, enter the identification
number you will use to set the printer to receive a fax.
❏
DRPD Switch Option
If you subscribe to the Distinctive Ring Pattern Detection (DRPD)
service through your phone company click the desired ring pattern.
Setting Up Speed Dial Assignments 6
You can set up fax numbers for speed dialing with the printer. You use
the fax recipients set up in your address book, assigning the desired
individual to speed dial codes.You can also set up a group speed dial, by
assigning two or more individual speed dial assignments to a single
speed dial assignment. For reference, you can print the list of speed dial
assignments to display near the printer.
To assign a fax recipient to a speed dial code:
1. In My MultiPASS, on the MultiPASS menu, point to Device Setup/
Speed Dial, and then click MultiPASS F50.
2. On the Speed Dial tab, in the Address Book box, click Address Book
to display the contents.
manual.book Page 127 Wednesday, August 22, 2001 3:44 PM