manualshive.com logo in svg

Canon MultiPASS F30, Software User'S Manual, Page: 139 / 170

Share
Download
Canon MultiPASS F30 Software User'S Manual Download Page 139

Chapter 7

Fine-tuning the MultiPASS Suite   133

To remove the MultiPASS Suite:

1.

Close the MultiPASS Suite and all of its components, including the 

Toolbar and Status Monitor. 

Be sure to close, and not just minimize, the Toolbar and Status 
Monitor. To close the Toolbar, right-click the Toolbar icon on the 
Windows taskbar, and then click Exit MultiPASS Toolbar on the 
Toolbar menu.

2.

On the Windows desktop, click Start, point to Settings, and then click 

Control Panel.

3.

In Control Panel, double-click Add/Remove Programs.

4.

In the Add/Remove Programs Properties dialog box, click 

MultiPASS Suite, and then click the Add/Remove button (Windows 
95/98/Me/NT) or the Change/Remove button (Windows 2000).

5.

Follow the on-screen instructions.

When prompted, click Remove to remove the MultiPASS Suite.

6.

If prompted when the removal process is complete, restart your PC.

If your installation of the MultiPASS Suite becomes damaged at some 
point (for example, program files are accidently deleted from the system), 
you can repair your installation without having to remove and reinstall 
the software. To do so, follow the instructions for removing the 
MultiPASS Suite. However, when prompted, click Repair instead of 
Remove. Then, follow the on-screen instructions. You may need to have 
your MultiPASS Suite installation disk available during the repair 
process.

Reinstalling the MultiPASS Suite

6

After you have uninstalled the MultiPASS Suite, you use the same 
instructions for reinstalling as described in Chapter 2, “Installing the 
MultiPASS Suite.” 

manual.book  Page 133  Wednesday, August 22, 2001  3:44 PM

Summary of Contents for MultiPASS F30











































































































































































Reviews:

No comments