manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 281

8-44

Tr

oub

leshooting

8

When You Cannot Obtain Appropriate Printout Results

Cause 2

"Top Margin" and "Paper Position" in the application are not specified properly.

Remedy

Specify the settings for "Top Margin" and "Paper Position" in the application 
properly, and then print again. (See the instruction manual supplied with your 
application)

Cause 3

The printing position has been adjusted in ADJ.START POS. in the USER 
MAIN. options in the SETUP menu.

Remedy

Adjust the printing position to an appropriate value using ADJ.START POS. in 
the USER MAIN. options in the SETUP menu. (See "Adjusting the Printing 
Position," on p. 7-22)

The next page is printed from halfway across the previous page.

Cause

"Line Spacing" or "Lines/Page" in the application is not specified properly.

Remedy

Specify the settings for "Line Spacing" and "Lines/Page" in the application so 
that data fits in one page, and print again. (See the instruction manual supplied 
with your application)

Data is printed with its size reduced.

Cause

The printer is set to reduce the print size.

Remedy

Confirm the setting for [Manual Scaling] in the printer driver. (See Driver Guide)

Paper comes out wrinkled.

Cause 1

Paper is loaded in the paper cassette or manual feed slot at an angle.

Remedy

Load the paper in the paper cassette or manual feed slot straight. (See 
"Loading Paper in the Paper Cassette," on p. 4-21, "Loading Paper in the 
Manual Feed Slot," on p. 4-38)

Cause 2

Paper is damp since the paper has been stored in unsuitable condition.

Remedy

Replace the paper with new one and print again. (See "Paper Requirements," 
on p. 4-2)

Paper curls.

Cause 1

Paper is damp since the paper has been stored in unsuitable condition.

Remedy

Replace the paper with new one and print again. (See "Paper Requirements," 
on p. 4-2)

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands