6-29
Pr
inting En
vironment Settings
6
SETUP Menu Settings
■
REMOTE UI SET.
REMOTE UI ..........................ON*, OFF
Specifies whether the printer should use the Remote UI.
■
ETHERNET DRIVER
AUTO DETECT.....................ON*, OFF
COMM.MODE*
1
....................HALF DUPLEX*, FULL DUPLEX
ETHERNET TYPE*
1
.............10 BASE-T*, 100 BASE-TX
MAC ADDRESS....................(Display only)
*1 COMM.MODE and ETHERNET TYPE are displayed only when AUTO DETECT is set to OFF.
Configures the Ethernet driver.
NOTE
For more details on configuring the Ethernet driver, see "Chapter 2 Common
Network Settings" in Network Guide.
■
INIT.N/W SET.
-
By the initialization in this item, you can reset the network settings to the default
settings.
The network settings can be initialized using the following procedure.
1.
Press the
(Settings) key.
2.
Select INTERFACE MENU using [
] and [
], then press [OK].
3.
Select NETWORK MENU using [
] and [
], then press [OK].
4.
Select INIT.N/W SET. using [
] and [
], then press [OK].
5.
<OK?> is displayed. The initialization starts by pressing [OK].
* If you press the
(Online) key without pressing [OK], the printer does not initialize the settings but
becomes ready to print.
NOTE
This item is displayed only when NETWORK in the I/F CONNECTION options is
set to ON.
CONNECT.RECOG.
ON*, OFF
When you print using a network, you may not obtain proper printout results
(Unreadable characters are printed, etc.). In this case, specify OFF for this item.
Summary of Contents for lpb3360
Page 2: ...LBP3360 Laser Printer User s Guide Downloaded from ManualsPrinter com Manuals ...
Page 25: ...xxii Downloaded from ManualsPrinter com Manuals ...
Page 83: ...3 10 Canceling a Job Using the Printer 3 Downloaded from ManualsPrinter com Manuals ...
Page 337: ...Index 10 40 Appendix 10 Downloaded from ManualsPrinter com Manuals ...
