manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 120

4-37

Printing from the Manual Feed Slot

Loading and Outputting P

aper

4

Printing from the Manual Feed Slot

The manual feed slot can be loaded with only one sheet of paper at sizes of A4, B5, 
A5, Legal, Letter, Executive, Index Card, Statement, 16K, and paper of the following 
custom paper sizes.

•

Custom Size Paper
When loading paper in portrait orientation: Width 76.2 to 215.9 mm; Length 127.0 
to 355.6 mm
When loading paper in landscape orientation (Only when UFR II Printer Driver is 
used): Width 127.0 to 215.9 mm; Length 127.0 to 215.9 mm

When printing only a sheet of paper that is different in size or type from the one 
loaded in the paper cassette, load the paper in the manual feed slot. Paper that 
cannot be loaded in the paper cassette such as transparency and envelope can be 
loaded in the manual feed slot.

When printing from the manual feed slot, you need to specify the following settings.

IMPORTANT

Match the setting for SLOT PAPER SIZE in the SETUP menu of the printer and that in 
the printer driver. If they do not match, the message <PC LOAD "size"> appears. In this 
case, the setting value for SLOT PAPER SIZE is changed to that in the printer driver by 
pressing the 

 (Online) key, allowing you to continue printing.

NOTE

If you are printing from an operating system on which the printer driver cannot be used, 
previously specify the paper source to MANU.FEED SLOT. (See p. 4-12)

■

Loading Paper in the Manual Feed Slot (See p. 4-38)

■

Specifying the Size of the Paper in the Manual Feed Slot (See p. 4-46)

The FEEDER MENU options in the SETUP menu

•

SLOT PAPER SIZE = the size of the loaded paper

When printing from DOS, UNIX, or other operating system on which the printer driver 
cannot be used, specify the following settings in addition to SLOT PAPER SIZE.

The FEEDER MENU options in the SETUP menu

•

STD PAPER SIZE = the size of the loaded paper (See p. 6-15)

•

STD PAPER TYPE = the type of the loaded paper (See p. 6-17)

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands