manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 265

8-28

Tr

oub

leshooting

8

Message List

IMPORTANT

Make sure that the printer is not operating and the 

 (Ready) indicator is on when 

loading paper in the manual feed slot. When printing multiple copies or multiple pages 
from the manual feed slot, make sure that the printer is not operating and the 

 

(Message) indicator is on before loading the second and subsequent paper. If paper is 
loaded in the manual feed slot while the printer is operating such as when the printer is 
printing or immediately after outputting paper, the loaded paper may be output without 
being printed, or this may result in paper jams.

<OF OPT.CONN.ERR.>

Cause 1

The optional paper feeder is not installed properly.

Remedy

Turn the power OFF, install the paper feeder properly, and then turn it ON again. 

Cause 2

The optional paper feeder is installed or removed when the printer is ON.

Remedy

Turn the power OFF, install or remove the paper feeder, then turn the printer ON 
again.

Cause 3

The connector of the optional paper feeder is disconnected.

Remedy

Turn the printer OFF, unplug the power plug from the AC power outlet and 
contact your local authorized Canon dealer.

Cause 4

A paper feeder that is not for this printer is installed.

Remedy

Turn the power OFF, install the paper feeder for this printer, and then turn it ON 
again.

<11 NO "size" PAPER>

Cause

Paper of the size specified in the application is not loaded in the paper source 
(in all the paper sources when PAPER SOURCE is set to AUTO; in the specified 
paper source when the setting is fixed).

Remedy 1 Refill or load paper.

Remedy 2 Press the 

 (Feeder Selection) key, then select other paper source for the 

same paper size or larger paper size. (See "Selecting a Paper Source," on p. 
4-12)

<12 COVER OPEN>

Cause

The front cover is open.

Remedy

Close the front cover firmly. If the printer is not online, press the 

 (Online) 

key.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands