manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 117

4-34

Loading and Outputting P

aper

Printing from the Paper Cassette

4

6

Set the paper cassette in the printer.

Push the paper cassette into the printer firmly until the front side of the paper 
cassette is flush with the front surface of the printer.

CAUTION

When setting the paper cassette, be careful not to catch your fingers.

This printer's paper cassette cannot automatically detect the paper size. Therefore, you 
need to register the size of the paper loaded in the paper cassette.
See "Specifying the Size of the Paper in the Paper Cassette" (p. 4-34) to register the 
paper size.

Specifying the Size of the Paper in the Paper Cassette

This printer's paper cassette cannot automatically detect the paper size. Therefore, 
when you loaded paper in the paper cassette, you need to specify the size of the 
paper loaded in the paper cassette using the control panel. When using standard 
size paper, specify its size. When loading custom size paper, specify CUSTOM 
SIZE or CUSTOM SIZER. The paper size setting for the paper cassette is set to 
"A4" by default.

Specify the paper size setting for the paper cassette using the following procedure.

IMPORTANT

•

Match the paper size specified in the SETUP menu of the printer and that specified in the 
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this 
case, the setting values for CASSETTE1 SIZE and CASSETTE2 SIZE are changed to 
those in the printer driver by pressing the 

 (Online) key, allowing you to continue 

printing.

•

When custom size paper is loaded, specify the settings for CASSETTE1 SIZE and/or 
CASSETTE2 SIZE as follows.
- When the paper is loaded in landscape orientation: CUSTOM SIZE

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands