manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 166

6-11

Pr

inting En

vironment Settings

6

SETUP Menu Settings

•

You can specify whether the printer should enter Power Save Mode when an error 
is occurring in the printer (when the 

 (Message) indicator is on, or the number in 

the message blinks). (See PWR SAVE IN ERR: the next item)

PWR SAVE IN ERR

ON*, OFF

Specifies whether the printer should enter Power Save Mode when an error is 
occurring in the printer (when the 

 (Message) indicator is on, or the number in 

the message blinks).

If this item is set to ON, the printer enters Power Save Mode even when an error is 
occurring in the printer.

If this item is set to OFF, the printer does not enter Power Save Mode when an 
error is occurring in the printer.

POWER SAVE TIME

15 minutes*, 30 minutes, 60 minutes, 180 minutes, 5 minutes

Specifies the time interval until the printer enters Power Save Mode 1 (the Panel 
Off mode).

NOTE

If the printer is in any of the following status, the printer does not enter Power Save 
Mode (the Panel Off mode) even when the specified time has elapsed.
- An error is occurring in the printer (when the 

 (Message) indicator is on, or the 

number in the message blinks), and PWR SAVE IN ERR is set to OFF.

- During the printer's startup

AUTO ERROR SKIP

OFF*, ON

Specifies whether the printer should automatically use the function that, when an 
error has occurred, releases the printer from the error temporarily (Error Skip) and 
continues the job.

If OFF is specified, you need to skip the error by pressing the 

 (Online) key.

If ON is specified, the printer skips the error automatically without you pressing 
the 

 (Online) key.

NOTE

•

The Error Skip function is only for skipping an error temporarily. Therefore, the data 
may not be printed properly.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands