manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 129

4-46

Loading and Outputting P

aper

Printing from the Manual Feed Slot

4

CAUTION

When loading paper, take care not to cut your hands with the edges of the 
paper.

IMPORTANT

Load the envelope so that it is straight.

Next, specify the paper size for the manual feed slot (See p. 4-46).

Specifying the Size of the Paper in the Manual Feed Slot

When you loaded paper in the manual feed slot, specify the paper size for the 
manual feed slot using the control panel. When using paper or envelopes of 
standard size, specify its size. When loading custom size paper, specify CUSTOM 
SIZE or CUSTOM SIZER. The paper size setting for the manual feed slot is set to 
"A4" by default.

Specify the paper size setting for the manual feed slot using the following 
procedure.

IMPORTANT

•

Match the paper size specified in the SETUP menu of the printer and that specified in the 
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this 
case, the setting value for SLOT PAPER SIZE is changed to that in the printer driver by 
pressing the 

 (Online) key, allowing you to continue printing.

•

When custom size paper is loaded, specify the setting for SLOT PAPER SIZE as follows.
- When the paper is loaded in landscape orientation: CUSTOM SIZE
- When the paper is loaded in portrait orientation: CUSTOM SIZER

•

When you change the paper loaded in the manual feed slot frequently, it is convenient if 
SLOT PAPER SIZE is set to MIXED SIZES. If SLOT PAPER SIZE is set to MIXED 
SIZES, you do not need to specify the setting for SLOT PAPER SIZE each time you load 
the different size paper. However, observe the following when specifying MIXED SIZES.
- Make sure that the size of the paper loaded in the manual feed slot matches the paper 

size specified in the printer driver before printing. If they do not match, the printer may 
stop printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may 
occur. Be sure to check if the paper size specified in the printer driver matches the size 
of the paper loaded in the manual feed slot before using the printer. However, if 
SPECIAL MODE J is set to ON, the printer prints without checking the paper size even 
when the paper size specified in the printer driver and the size of the paper loaded in 
the manual feed slot do not match. For more details, see "SPECIAL MODE J," on p. 
6-31.

- When printing from UFR II Printer Driver, you can load paper either in portrait or 

landscape orientation. However, when printing custom size paper of its long edges 
215.9 mm or less, load the paper in landscape orientation. When you are not using 
UFR II Printer Driver, load the paper in portrait orientation.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands