Canon lpb3360 User Manual Download Page 277

Page: 277 / 338

8-40

oub

leshooting

When You Cannot Obtain Appropriate Printout Results

Cause 2

There is data remaining in the memory (the

(Job) indicator is on).

Remedy

Press the

(Online) key to place the printer offline, then select FORM FEED

in the RESET menu to output all the data remaining in the memory. (See
"Canceling a Job," on p. 3-6)

Cause 3

The interface cable is disconnected.

Remedy

Connect the interface cable firmly to the interface connectors on the computer
and printer unit. (See "Connecting to a Computer," on p. 2-23)

Cause 4

This printer or any optional accessory is broken.

Remedy

Clear the problem referring to the message in the display. (See "Message List,"
on p. 8-27, "Ser vice Call Display," on p. 8-37)

All the indicators on the print server are off.

Cause 1

The LAN cable is not connected properly or broken.

Remedy 1 Remove the LAN cable once, then connect it again.

Remedy 2 Replace the LAN cable with another one, then connect it.

Cause 2

The cable is connected to the UP-LINK (cascade) port on the hub.

Remedy 1 Connect the LAN cable to a port with a "X" mark.

Remedy 2 If the hub has a UP-LINK (cascade) switch, switch to "X".

Cause 3

A cross LAN cable is being used.

Remedy 1 Replace the cable with a straight LAN cable.

Remedy 2 Connect the cross LAN cable to the UP-LINK (cascade) port on the hub. If the

hub has a UP-LINK (cascade) switch, switch to "=".

NOTE

A cross LAN cable is a cable used to connect to a printer and computer directly.

Cause 4

Cannot communicate with the hub.

Remedy 1 Make sure that the power of the hub is on.

Remedy 2 Set network transmission setting for the print server according to the

transmission speed of the connected hub. (See "ETHERNET DRIVER," on p.
6-29)

Remedy 3 Replace the hub.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Search results

Summary of Contents for lpb3360

Reviews:

Brands by name

Popular brands

Canon lpb3360, User Manual

Search results

Summary of Contents for lpb3360

Reviews:

Brands by name

Popular brands