manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 273

8-36

Tr

oub

leshooting

8

Message List

<FM SCALE ERROR>

<Auto Error Skip>

Cause

There is a character in which the number of coordinate points on the contour 
lines exceeds the limitation of a pseudo-scalable font.

Remedy

Perform "Error Skip", then continue printing. However, the characters with which 
an error has occurred are not printed properly.

<PC LOAD "size">

Cause

The paper of the size specified in the application is not loaded in the paper 
cassette or manual feed slot, or the paper source for the different paper size is 
selected.

Remedy 1 Load the paper of the size selected in the application (or the one specified by 

scaling factors). (See "Printing from the Paper Cassette," on p. 4-19)

Remedy 2 If you are using the manual feed slot, check SLOT PAPER SIZE, and when the 

paper size does not match the size specified in the application, specify the 
setting properly. (See "Printing from the Manual Feed Slot," on p. 4-37)

Remedy 3 Press the 

 (Feeder Selection) key, then select the paper cassette in which the 

paper of the matched size is loaded. (See "Selecting a Paper Source," on p. 
4-12)

Remedy 4 Press the 

 (Online) key, then print to the currently loaded paper forcibly. If 

you are using the manual feed slot, the setting for SLOT PAPER SIZE 
automatically changes to the setting specified in the application.

IMPORTANT

If you open the front cover when the message <PC LOAD "size"> is displayed, the 
message may disappear. However, be sure to follow the directions in the displayed 
message to change the paper.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands