manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 272

8-35

Tr

oub

leshooting

8

Message List

<D8 VERSION ERROR>

Cause

You tried to print from a printer driver that is not for LBP3360.

Remedy

Print from the printer driver for LBP3360.

<D8 SYNTAX ERROR>

Cause

Invalid data is sent when printing using UFR II Printer Driver.

Remedy 1 Press the 

 (Online) key to continue printing from the next data. However, the 

page with which an error has occurred and its subsequent pages are not 
printed.

Remedy 2 Confirm the data to be printed, then print again.

<D8  nn  ERROR> ("nn" represents two-digit alphanumeric characters)

Cause

A problem has occurred and the printer does not operate properly.

Remedy

Cycle the power of the printer. If the message appears even after cycling the 
power of the printer, note down the message in the display, and contact your 
local authorized Canon dealer.

<F9-nn PWR OFF>ON> ("nn" represents two-digit alphanumeric characters)

Cause

A problem has occurred while the printer is processing print data.

Remedy

Cycle the power of the printer. If the message appears even after cycling the 
power of the printer, note down the message in the display, and contact your 
local authorized Canon dealer.

<FF FONT FULL>

<Auto Error Skip>

Cause

Because of too many fonts to be registered, the field (font table) for registering 
font information has run out and overflowed.

Remedy

The printer continues printing by pressing the 

 (Online) key. However, the 

page with which an error has occurred is not printed properly.

<FM SIZE ERROR>

<Auto Error Skip>

Cause

There is some font with its size exceeds the pseudo-scalable font size.

Remedy

Perform "Error Skip", then continue printing. However, the characters with which 
an error has occurred are not printed properly.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands