manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 146

5-9

Menu Functions and Menu Operation

The Pr

inting En

vironment

5

Menu Functions and Menu Operation

This section describes the overview of the menus and operating procedures for 
them.

 

SETUP Menu

This section describes the function of the SETUP menu and the operating 
procedure for it.

SETUP Menu Functions

The SETUP menu allows you to configure a variety of printing environment such as 
printing position, type of character set, and the selection of the interface for 
connecting the printer to the computer.

Normally, you can configure a printing environment using an application or the 
printer driver in a computer connected to the printer. However, some settings such 
as interface configuration can be specified only in the SETUP menu of the printer. 
Also, you can print using an application in which you cannot specify the print 
settings or MS-DOS command directly. When you are printing using them, specify 
the printing environment using the SETUP menu in the printer.

NOTE

For more details on the settings, see "SETUP Menu Settings," on p. 6-10.

Operating Procedure for the SETUP Menu

The SETUP menu consists of three hierarchies: "Option", "Item", and "Setting 
Value". Select the target options in each hierarchy.

As an example of the setting procedure, this section describes the procedure for 
setting SLOT PAPER SIZE in the FEEDER MENU options to B5. Start the key 
operation from Step 1.

Operation Procedure

Key Operation

1

Place the printer offline.

Press the 

 (Online) key.

When the printer is online, the SETUP menu can 
be displayed, however, the USER MAIN. options 
cannot be specified.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands