manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 178

6-23

Pr

inting En

vironment Settings

6

SETUP Menu Settings

Specify OFF for this item when you want to match the setting of the orientation or 
printing side for the last page with those for its previous page, such as when you 
want to print previously printed paper etc. whose printing orientation or printing 
side is fixed.

NOTE

This item is effective only when 2-SIDED PRINT. is set to ON.

QUALITY MENU Options

IMGE REFINEMENT

ON*, OFF

Specifies whether the printer should use Image Refinement that enables to print 
jagged outlines of text or graphics smoothly.

If ON is specified, the printer prints using Image Refinement.

If OFF is specified, the printer prints without using Image Refinement.

NOTE

•

The effect of Image Refinement varies depending on the pattern of text or graphics 
(diagrams, charts, graphs, etc).

•

If GRADATION LEVEL (See the next item) is set to HIGH, the setting for this item is 
ignored, and the printer prints in the same way as when OFF is specified.

GRADATION LEVEL

STANDARD*, HIGH

Specifies the gradation level for data.

STANDARD is suitable to print thin lines or data of low resolution.

HIGH is suitable to print data of high resolution with complex gradations, such as 
photographs and graded images. You print data more clearly than when 
STANDARD is specified.

NOTE

If this item is set to HIGH, the setting for IMGE REFINEMENT (See the previous 
item) is ignored even if ON is specified for it, and the printer prints in the same way 
as when OFF is specified.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands