Canon lpb3360 User Manual Download Page 266

Page: 266 / 338

8-29

oub

leshooting

Message List

<13 PAPER JAM>

Cause

Paper is jammed inside the printer

Remedy

Remove the jammed paper and set the paper cassette and covers to the
original position. If the printer is not online, press the

(Online) key. (See

"Paper Jams," on p. 8-4)

IMPORTANT

•

If paper jams have occurred at multiple areas at the same time, the areas appear in the
display by rotation.

•

If you have removed the jammed paper without opening any cover, be sure to open and
close the front cover once, and then press the

(Online) key.

<14 NO TONER CART>

Cause

The toner cartridge is not installed or installed improperly.

Remedy

Install the toner cartridge properly. (See "Replacing the Toner Cartridge," on p.
7-2)

<18 FEED ERROR>

Cause

Paper of the size or type that cannot be fed from the manual feed slot or paper
cassette is specified.

Remedy 1 If a paper source is specified, press the

(Feeder Selection) key, then set

PAPER SOURCE to AUTO.

Remedy 2 Press the

(Feeder Selection) key, select a paper source from which paper of

the specified size or type can be fed, then load paper.

Remedy 3 Specify the settings for STD PAPER SIZE and STD PAPER TYPE in the

FEEDER MENU options in the SETUP menu to the size or type of paper that
can be loaded in the paper source.

Remedy 4 Press the

(Online) key, then print from the currently selected paper source.

However, this may result in deterioration in print quality.

<18 CHK MANU SLOT>

Cause

Paper is loaded in the manual feed slot.

Remedy 1 If you want to use the paper loaded in the manual feed slot for printing, press

the

(Feeder Selection) key, and then set PAPER SOURCE to MANU.FEED

SLOT.

Remedy 2 Remove any paper loaded in the manual feed slot.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Search results

Summary of Contents for lpb3360

Reviews:

Brands by name

Popular brands

Canon lpb3360, User Manual

Search results

Summary of Contents for lpb3360

Reviews:

Brands by name

Popular brands