manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 165

6-10

SETUP Menu Settings

Pr

inting En

vironment Settings

6

SETUP Menu Settings

CONTROL MENU Options

POWER SAVE MODE

PANEL OFF*, DEEP SLEEP, OFF

Specifies whether the printer should use Power Save Mode.

There are two types of Power Save Mode, and the type of the mode the printer 
enters depends on the setting for this item.

*

Even if PANEL OFF or OFF is specified for this item, the printer enters Power Save Mode 2 (the Deep 
Sleep mode) when [Deep Sleep] is executed in the Remote UI ([Device Manager] 

➞

 [Status] 

➞

 

[Device Control] 

➞

 [Deep Sleep]).

Power Save Mode consumes less power during the sleep state. While the printer 
is in Power Save Mode, the display on the control panel is off, and the following 
indicators are on.

NOTE

•

For details on Power Save Mode, see "Power Saving (Power Save Mode)," on p. 
3-2.

Setting Value

Power Save Mode the Printer Can Enter

PANEL OFF

Power Save Mode 1 (the Panel Off mode) *

DEEP SLEEP

Power Save Mode 1 (the Panel Off mode)
Power Save Mode 2 (the Deep Sleep mode)

OFF

The printer does not enter Power Save Mode. *

Power Save Mode Type

Indicator that Comes On

Power Save Mode 1 
(the Panel Off mode)

When the printer is online: 

   

 (Ready) indicator, Power indicator

When the printer is offline: 

   

 (Message) indicator, Power indicator

Power Save Mode 2 
(the Deep Sleep mode)

Power Indicator

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands