manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 69

Turning the Printer ON and Checking the Printer Operation

2-32

Installing the Pr

inter

2

When the Printer Does Not Operate Properly

If the printer does not operate even after turnig it ON or print Configuration Page 
Print properly, the following causes are conceivable.

Symptom

Cause

Remedy

The printer cannot 
be turned ON.

The power plug is unplugged from 
the AC power outlet.

Plug the power plug into the AC 
power outlet.

There is a break in the power 
cord.

If the printer is turned ON after 
replacing the power cord with the 
one that is of the same type and 
is used for other device, there is a 
break in the power cord. In this 
case, purchase a new power cord 
and replace it with the broken 
one.

The indicators on 
the control panel do 
not come on.

The printer is not turned ON.

Turn the printer ON.

The printer is in Power Save 
Mode.

The printer will be ready to print 
after you send print data or press 
any key on the control panel.

The printer does 
not operate.

The printer is offline.

Press the 

 (Online) key to turn 

on the 

 (Online) indicator.

The interface cable is 
disconnected.

Connect the interface cable firmly 
to the interface connectors on the 
computer and printer unit.

A paper jam occurs 
each time you print.

The amount of the paper loaded 
in the paper cassette or manual 
feed slot exceeds the load 
limitation.

Reduce the amount of paper to 
within the load limitation and print 
again.

Paper is not loaded properly in 
the paper cassette or manual 
feed slot.

Load the paper properly and print 
again.

Unusable paper is loaded in the 
paper cassette or manual feed 
slot.

Replace the paper with one that 
can be used and print again.

There is still jammed paper inside 
the printer.

Remove any jammed paper and 
print again.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands