manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 193

6-38

UTILITY Menu Settings

Pr

inting En

vironment Settings

6

UTILITY Menu Settings

NOTE

For the output samples of CONFIG.PAGE, NW STATUS PRINT, and PRNTPOSNPRINT, 
see "The Lists Common to All the Settings in the Operation Mode," on p. 10-2. For the 
output sample of the PCL fonts list, see "The Lists Common to Certain Settings in the 
Operation Mode," on p. 10-4.

CONFIG.PAGE

-

Prints the capacity of the built-in memory (RAM) or the contents specified in the 
SETUP menu. You can select this item regardless of the setting for the operation 
mode.

NOTE

CONFIG.PAGE is designed to be printed on A4 size paper. Load a sheet of A4 size 
paper in the paper cassette or manual feed slot.

PCL UTILITY

FONTS LIST

Prints internal information of the printer in the PCL mode.

FONTS LIST

A list of the fonts that can be used in the PCL mode is printed.

CLEANING

-

The printer cleans the fixing roller by printing a cleaning page.

If CLEANING is executed, <CLEANING1 PAPER> is displayed. Load a sheet of 
A4 size paper in the manual feed slot, then press the 

 (Online) key.

A cleaning paper is printed. Load the cleaning paper with the printed side facing 
down in the manual feed slot, then press the 

 (Online) key. The loaded 

cleaning paper is fed, cleaning inside fixing roller.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands