Canon Laser Class 810, Basic Operation Manual, Page: 370 / 412

Mach
ne Sett
ngs
12-40
SYSTEM SETTINGS
2. STATELESS ADD SET Sets whether to automatcally specfy a stateless address upon
startup.
OFF
ON
–
–
3. MANUAL ADD SET Allocates an IPv6 address to the machne manually.
1. USE MANUAL
ADD
Sets whether to set a fxed IPv6 address to the machne.
OFF A fxed IPv6 address s not set.
ON Sets a fxed IPv6 address to the machne.
2. MANUAL
ADDRESS
Regsters a fxed IPv6 address to the machne.
3. PREFIX LENGTH Sets the prefx length of the IPv6 address. (0-128)
4. DEF. ROUTER
ADD
Sets the default router address.
4. USE DHCPv6 Sets whether to set to obtan a stateful address from a DHCP
server usng DHCPv6.
ON
OFF
–
–
5. PING COMMAND Enables you to check whether the machne can connect to a
devce on the network.
1. PING
COMMAND
Enter the IPv6 address of a devce on the network and press
[OK] to check whether the machne can connect to that devce.
2. HOST NAME Enter the host name of a devce on the network and press [OK]
to check whether the machne can connect to that devce.
6. SET IP ADD RANGE Sets whether to restrct the range of IP addresses.
OFF Dsables restrcton of IP address of computers.
ON Enables you to set whch IP addresses can send data (prnt/fax
jobs) to the machne. You can select to permt or reject up to
ten ranges of IP addresses. Set each range of IP addresses by
enterng an IP address n both <START IP ADDRESS>, <END IP
ADDRESS> and <PREFIX LENGTH>.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
5. IP ADDRESS 5
6. IP ADDRESS 6
7. IP ADDRESS 7
8. IP ADDRESS 8
9. IP ADDRESS 9
10. IP ADDRESS 10
–
–
–
–
–
–
–
–
–
–