Canon Laser Class 810, Basic Operation Manual

Page: 304 / 412

Troubleshoot
ng
11-14
Error Code Description Action
#0005 The other fax machne dd not
respond wthn 35 seconds.
– Send the document agan. Contact
the other party and have them
check ther fax machne. If you
are makng an overseas call, add a
pause to the number.
–
The other party may not be usng a
G3 fax machne.
– Check wth the other party and
send the document to a G3 fax
machne. If the other party does
not have a G3 fax machne, try
sendng your document usng
a transmsson mode the other
party's fax machne supports.
–
#0009
The paper has run out or the paper
cassette s not set properly. Load the paper or reset the paper
cassette properly.
#0012
You could not send because the other
party's fax machne s out of paper. Contact the other party and ask them
to load the paper.
#0018 There s no reply when you redal.
You could not send, because your fax
sgnal was not returned as the other
party's lne was engaged. Check that the other party's lne s
not engaged and try agan from the
begnnng.
#0037 The memory s full. Prnt, send, or delete any documents
stored n memory.
#0703
The memory for mage data s full
when sendng documents. Wat a few moments, and then try
sendng agan after other send jobs
are complete.
Erase documents stored n
memory. If the machne stll does
not operate normally, turn the
man power OFF, and then back
ON.
–
–
#0705 The send operaton was nterrupted
because the sze of the mage data
s larger than that specfed n <MAX
TX DATA SIZE> n <E-MAIL/I-FAX> n
<COMMUNICATIONS> n <SYSTEM
SETTINGS>. Change the settng for <MAX TX
DATA SIZE> n <E-MAIL/I-FAX> n
<COMMUNICATIONS> n <SYSTEM
SETTINGS>.
Select a lower resoluton.
Set <DIVIDE INTO PAGES> to <ON>
n send settngs.
–
–
–
#0751 The server s not functonng. The
network s down (the server s unable
to connect to the network or was
dsconnected). Check the recpent's address.
Check that the network s up.
–
–