Canon imageRUNNER ADVANCE C5535i III, User Manual

Page: 72 / 2125

● For LDAPv3, you can skip the setting because the machine retrieves automatically the server’s
setting. For LDAPv2, always specify the point.
Entering the format of <Position to Start Search>
● When you use Windows Server, enter the domain name of the Active Directory in units of strings
divided by a dot ".". Add "DC=" for each unit and separate them with commas ",".
Example: When the domain name is "john.example.com", enter "DC=john,DC=example,DC=com".
● When you use Lotus Notes Domino, enter the directory tree node identification name (dn) like
"cn=user1,ou=team1,ou=salesdept,o=canon".
<Use TLS>
To encode the communication to/from the LDAP server using TLS, press <On>.
<Search Timeout>
Specify in seconds how long the search can continue.
<Max Addresses to Search>
Specify how many destinations can be searched.
<Port Number>
Enter the port number used when communicating to/from the LDAP server.
3
Press <Next>.
4
Set authentication information.
● Specify authentication methods according to the settings of the LDAP server.
● You can check the connection by pressing <Check Connection> after specifying the settings.
When authenticating using login information
Enter the user name and the password used as authentication information.
1
Press <Use> in <Authentication Information>.
2
Enter the user name and the password and carry out the necessary settings.
<User Name>
Enter the user name of the machine registered on the LDAP server.
Entering the format of the user name
● When you use Windows Server, enter in the format of "(Windows domain name)\(Windows user
name)".
Setting Up
58