manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5535i III, User Manual

Share
Download
Canon imageRUNNER ADVANCE C5535i III User Manual Download Page 1347

●

Check the proxy server settings.

◼

#886

When sending with WebDAV, a response indicating that the request was invalid was received from the

destination (received HTTP Error 400: Bad Request).

●

When sending via a proxy with non-TLS communication, set <Use Divided Chunk Send for WebDAV TX> to
<Off>.

<Use Divided Chunk Send for WebDAV TX>(P. 1097) 

◼

#889

The original could not be scanned or printed because it was embedded with job restriction information.

●

Check the job restriction information or contact your administrator.

◼

#899

E-mail or I-fax transmission completed normally. However, the transmission may not have been received

by the other party because it is relayed by multiple servers.

●

Ask whether the other party received the transmission, as necessary.

The fax was sent normally from the remote fax client. However, reception may be incomplete because

the transmission was relayed via a remote fax server.

●

Check whether the fax was sent in the transmission results of the remote fax server.

●

Check the status of the server and network.

●

Ask the recipient to check that the document was received properly.

◼

#904

Destinations registered in <Favorite Settings> are not updated when the Address Book is retrieved using

device information delivery from an iR/imagePRESS series machine connected to the network.

●

Register <Favorite Settings> again from the touch panel display of the machine.

◼

#905

The job could not be executed because a network error occurred.

●

Check the path length and access privileges of the server, and whether the file or folder is in use.

◼

#918

Could not recognize the QR code in the original.

●

Check whether the QR code is in the correct position and scan the original again.

◼

#919

A syntax error or a PostScript error that exceeds device restrictions, etc. was detected.

Troubleshooting

1333

Summary of Contents for imageRUNNER ADVANCE C5535i III














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands