manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5535i III, User Manual

Share
Download
Canon imageRUNNER ADVANCE C5535i III User Manual Download Page 1325

●

Specify another destination, and try sending again.

When sending to a destination registered in the address book, sending could not be performed because

the destination was deleted from the address book while the machine was waiting to send.

●

Specify another destination, and try sending again.

Sending from the fax driver is not allowed.

●

Set  <Allow  Fax  Driver  TX>  to  <On>,  and  try  sending  again. 

Restricting  the  Fax  Sending

Functions(P. 759) 

◼

#025

When sending a fax from a remote fax client machine, a line that does not exist in the remote fax server

machine was specified.

●

Check the number of lines in the server machine, and try sending again after matching the remote fax
transmission settings of the client machine with the number of lines on the server machine.

<No. of TX Lines>(P. 1109) 

◼

#033

The device of the other party does not support confidential communication or subaddresses.

●

Send without using confidential communication or subaddresses.

◼

#034

The confidential storage location in the device of the other party specified for confidential

communication was not found.

●

Check the confidential storage location in the device of the other party, and try sending again.

The memory was insufficient in the device of the other party.

●

Ask the other party to free up some space.

◼

#035

The device of the other party does not support the forwarding function or subaddresses.

●

Directly send to the other party.

◼

#037

The document could not be copied or received because there was insufficient memory available.

●

Organize documents in the Memory RX Inbox to make more memory available.

Printing Documents in the Memory RX Inbox(P. 433) 

●

If you are copying a document with more than 100 pages in one operation, divide the document into two
or more parts and then copy.

Data containing more than 1,000 pages was received.

●

The machine deletes any pages after the 999th page, and prints or stores the remaining 999 pages. Tell
the other party to send the 1,000th and subsequent pages again.

Troubleshooting

1311

Summary of Contents for imageRUNNER ADVANCE C5535i III














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands