manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5535i III, User Manual

Share
Download
Canon imageRUNNER ADVANCE C5535i III User Manual Download Page 1294

●

Set <Use Divided Chunk Send for WebDAV TX> to <Off>.

<Use Divided Chunk Send for WebDAV TX>(P. 1097) 

The proxy server failed to communicate with an upstream server.

●

Check whether the WebDAV server and proxy server settings are correct.

An HTTP protocol version not supported by the WebDAV server was used in a request from the WebDAV

client.

●

Check whether the WebDAV server settings are correct.

The disk space of the WebDAV server is insufficient for the request from the WebDAV client.

●

Make sufficient disk space for the request available on the WebDAV server.

The appropriate paper size, A4, is not available.

Paper of the optimal size selected with Automatic Paper Selection has not been loaded.

●

Load paper of the displayed size.

<Paper Drawer Auto Selection On/Off> is set to <Off>.

●

Specify the paper drawer manually.

●

Set a paper source loaded with the optimal paper size to <On> in <Paper Drawer Auto Selection On/Off>.

<Paper Drawer Auto Selection On/Off>(P. 1076) 

Paper of a type that cannot be selected with Automatic Paper Selection is loaded.

●

Specify the paper drawer manually.

●

If you are copying, select the <Consider Paper Type> check box in <Paper Drawer Auto Selection On/Off>.

<Paper Drawer Auto Selection On/Off>(P. 1076) 

Sub line was disconnected due to a subnet mask conflict.

The network addresses of the main line and sub line conflict.

●

Check the IP address and subnet mask settings of the main line and sub line.

Setting an IP Address(P. 36) 

There are too many subdirectories.

The maximum number of characters was exceeded because the number of levels was too deep.

●

The destination cannot be specified. Specify another destination.

Remove all the output paper.

Paper has accumulated in the output tray.

●

Remove all paper from the output tray.

Cannot install this application because an applet included in the specified application
has exceeded the area that can be displayed in the device panel.

The application could not be installed because its applet exceeds the area that can be displayed on the

screen of the machine.

●

Install the applet for an application that can fit in the display area of the machine.

Troubleshooting

1280

Summary of Contents for imageRUNNER ADVANCE C5535i III














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands