manualshive.com logo in svg

Canon imageRunner 2220i, User Manual

Share
Download
Canon imageRunner 2220i User Manual Download Page 89

Searching a Destination via a Server (Search on Server)

1-68

V

a

rious Sending Methods

1

Searching a Destination via a Server 

(Search on Server)

You can specify a destination by searching the directory listings on the network 
using LDAP (Lightweight Directory Access Protocol) servers. LDAP servers are for 
looking up a particular piece of information, such as a user name, e-mail address, 
or other contact information.

NOTE

•

You may have to set up the LDAP servers beforehand, depending on the network 
environment.

•

For details on server settings, see Chapter 4, “Selecting and Storing Settings,” in the 

Reference Guide

.

•

You can send to a maximum of 16 destinations at the same time, including destinations 
that are specified through a server.

•

Only names, e-mail addresses, and fax numbers are displayed as the search results from 
the LDAP server. 

•

You cannot directly specify a destination that is obtained through a server as a forwarding 
destination. To specify the destination as a forwarding destination, you must first store it 
in the Address Book. (See “Storing Addresses Searched via a Server,” on p. 4-45.)

1

Press [Address Book/Server].

Summary of Contents for imageRunner 2220i



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands