manualshive.com logo in svg

Canon imageRunner 2220i, User Manual

Share
Download
Canon imageRunner 2220i User Manual Download Page 161

Configuring Send Settings (Send Settings)

1-140

V

a

rious Sending Methods

1

Configuring Send Settings 

(Send Settings)

You can enter a subject line, message body, and a reply-to address to documents 
to be sent. You can send documents without changing any of the settings, or 
configure them as needed.

When you send a document, you can also set to send it at a preset time.

NOTE

To send documents to another fax machine, it is necessary for the Super G3 Fax Board 
(optional) to be installed.

Specifying the Time to Send a Job (Delayed Send)

Delayed Send enables you to store a send job in memory, and send it later at a 
specified time.

NOTE

•

Delayed Send can reserve up to 120 jobs (Among these, 64 Fax jobs can be reserved.). 
However depending on sending conditions, the actual number may be less than 120. The 
following two conditions are typical examples:
- Sending multiple documents at the same time
- Sending large documents

•

The number of delayed send jobs

 

could be reduced if there are other jobs without 

Delayed Send settings, or depending on the specified destinations.

•

When Delayed Send is completed, the documents in memory are automatically deleted.

•

You can check the status, cancel, or change the destinations of documents for which 
Delayed Send Time has been set. (See Chapter 2, “Checking Job and Device Status,” in 
the 

Reference Guide

.)

Summary of Contents for imageRunner 2220i



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands