Changing the Scan Settings
1-121
V
a
rious Sending Methods
1
4
Press [Original Frame Erase]
➞
set the frame erase width area
to by pressing [–] or [+]
➞
press [Next].
When entering values in millimeters, you can use
-
(numeric keys)
and
(Clear) to clear your entry.
If you enter values using
-
(numeric keys), you can change the entered
values by pressing [–] or [+].
The frame area is erased evenly (based on the value you set) around each edge
of the original. To set different frame erase width values for the top, left, right and
bottom sides of the original independently, press [Adjust Each Dim.].
When you press [Adjust Each Dim.], select the frame erase values by pressing
[–] or [+]
➞
press [Next].
When entering values in millimeters, you can use
-
(numeric keys)
and
(Clear) to clear your entry.
If you enter values with
-
(numeric keys), you can change the entered
values by pressing [–] or [+].
The screen for the next step is displayed.
0
9
C
0
9
0
9
C
0
9
