Canon IMAGERUNNER 2020 Facsimile Manual Download Page 99

Page: 99 / 231

Adjusting the Scan Settings

3-10

ing F

Specify the destination

➞

press [Start].

For instructions on specifying the destination, see “Dialing Methods,” on p. 2-2.

If you want to specify other send settings, set them before specifying the
destination.

If the original is placed on the platen glass, follow the instructions that appear on
the LCD display

➞

press

(Start) once for each original. When scanning is

complete, press [OK].

Scanning starts.

The scanned data is sent to the destination once scanning is complete.

NOTE

To cancel all settings and return the machine to the Standby mode, press

(Reset).

Start

Summary of Contents for IMAGERUNNER 2020








































































































































































































































Search results

Summary of Contents for IMAGERUNNER 2020

Reviews:

Related manuals for IMAGERUNNER 2020

Brands by name

Popular brands

Canon IMAGERUNNER 2020, Facsimile Manual

Search results

Summary of Contents for IMAGERUNNER 2020

Reviews:

Related manuals for IMAGERUNNER 2020

Brands by name

Popular brands