Sending Methods
3-5
Se
nd
ing F
a
x
e
s
3
IMPORTANT
•
The Direct TX mode can be used only when you place originals into the Feeder
(DADF-P1).
•
You can specify only one destination at a time when using the Direct TX mode.
•
If you cancel the Direct TX mode during transmission, the originals that have already
been scanned are sent.
•
If you try to send a fax in the Direct Sending mode while the machine is already sending
another document, Memory Sending is used instead, and your document is sent as soon
as the current send job is complete.
1
Place your originals into the feeder
➞
press [FAX].
The FAX indicator lights and the machine enters the Fax Standby mode.
NOTE
For instructions on placing your originals, see “Placing Originals,” on p. 1-34.
2
Press [Direct TX].
The Direct TX key lights.
NOTE
To cancel the Direct TX mode, press [Direct TX] again.
3
Select the desired send settings.
For instructions on selecting the send settings, see:
•
•
FAX
Direct TX
