Glossary
11-12
Ap
pe
ndix
11
T
Tone/pulse setting
This setting enables you to set the machine to touch tone (T) or pulse (P) dialing,
depending on the type of phone line you have installed.
Tone
You can switch temporarily from pulse to tone dialing by pressing [Tone] before
dialing. Data services may require that you use tone dialing, so if you have a
conventional pulse dial telephone, and need to use tone dial to access the data
service, press [Tone] to tone dial on your pulse telephone line.
Transmission time
A fax transmission consists of three stages: the pre-message handshake, the
message transmission, and the post-message handshake. The transmission time
described in this manual is not the total time required for the entire transmission. It is
only the time for the message transmission. The transmission time described in this
manual is the fastest time achieved when faxes communicate in the same mode.
TTI
Stands for Transmit Terminal Identification. Also called sender information. The TTI is
the name of the person or organization, and the facsimile number of the machine that
sends a document. You can register a name to be printed at the top of the message
you send. In most occasions, you register your company’s name or personal name as
the TTI.
U
Ultra Fine
This setting increases the clarity of documents you send. It is eight times the standard
resolution.
