Sending Methods
3-7
Se
nd
ing F
a
x
e
s
3
1
Place your originals into the feeder
➞
press [FAX].
The FAX indicator lights and the machine enters the Fax Standby mode.
NOTE
For instructions on placing your originals, see “Placing Originals,” on p. 1-34.
2
Press [Stamp].
To cancel the Stamp mode, press [Stamp] again.
The Stamp key lights and the Stamp mode is set.
NOTE
You can also set the Stamp mode from the Additional Functions menu. However,
be aware that the Stamp key will not light if you set the Stamp mode in this way.
Make sure to set the Stamp mode to ‘OFF’ after you scan your documents. (See
“Changing the Fax Default Settings,” on p. 6-4.)
3
Specify the destination
➞
press [Start].
Scanning starts.
A stamp mark (
) appears on all of the original output.
NOTE
If the stamp is not marked clearly, see Chapter 7, “Routine Maintenance,” in the
Reference Guide
.
FAX
Stamp
Start
