Receiving Faxes
4-3
Receiving F
a
x
e
s
4
Receiving Faxes in Memory When a Problem Occurs
If the machine encounters a problem while it is receiving a fax, the machine
automatically stores the unprinted pages of the fax document in memory, and a
message <RECEIVED IN MEMORY> appears on the LCD display along with
messages describing the problem. When the problem is cleared, the machine
automatically prints the received documents which have been stored in the
memory. For more information on the various messages, and the actions you can
take, see “LCD Messages,” on p. 9-2.
NOTE
•
The memory can hold up to 95 send or receive jobs, or approximately 1,000 pages of
sent and received documents.
- Based on the condition that the sender sends the fax by the imageRUNNER 2020/2016
with ITU-T No.1 Chart standard mode. The maximum number of pages that the
machine’s memory can store varies depending on the sender’s machine.
•
Once the stored pages are printed, they are deleted from memory.
•
If the memory becomes full, you will not be able to receive the remaining pages. Contact
the sender and ask them to resend the remaining pages of the fax.
Receiving Faxes in Memory
1
When documents are being received, the Processing/Data
indicator on the control panel flashes a green light.
If you press [System Monitor] during reception, the transaction number and the
information about the sender of the incoming document appear on the LCD
display.
