Transmission Settings
6-18
Customizing F
a
x
Settings
6
Time Out Mode
The Time Out mode enables you to set the machine to automatically start scanning
documents after you specify the destinations by using the one-touch or coded
speed dialing keys, or by pressing [Redial], without pressing [Start].
If you set the Time Out mode to ‘ON’, the machine pauses for five seconds after
you specify a destination before starting to scan.
If you are using sequential broadcasting to send your document to more than one
location, you must dial the second fax number within five seconds of dialing the first
fax number. Each subsequent number must be dialed within 10 seconds of the
previous one. If you wait longer than the specified timeout interval before dialing the
next number, the machine starts to scan your document.
NOTE
The default setting is ‘ON’.
1
Press [Additional Functions]
➞
[
] or [
] until <FAX
SETTINGS> appears
➞
press [OK].
If necessary, see the screen shots in steps 1 and 2 of “Adjusting the Line Monitor
Volume,” on p. 6-2.
2
Press [
] or [
] until <TX SETTINGS> appears
➞
press [OK].
3
Press [
] or [
] until <TIME OUT> appears
➞
press [OK].
Additional
Functions
OK
OK
OK
