Chapter 19
19-48
4. IMG-REG
Adjustment for color displacement of the color image
T-19-31
5. DENS
Concentration of developer in developer unit.
T-19-32
COPIER>ADJUST>IMG-REG
Sub item
Description
level.
MAG-H-K
Used to adjust magnification of the Bk image's main scanning direction.
Adjustment method
- If you have cleared the DC controller PCB's RAM or replaced the DC controller PCB, enter the
value on the service label.
Adjustment range 10 to 10 [Factory default/After RAM clear: 0]
Reference:
This item is to enable input of the factory-adjusted value, and should not be adjusted in the market.
1
COPIER>ADJUST>DENS
Sub item
Description
level.
T-SPLY-Y
Adjusting the amount of toner supply (Y color)
Adjustment method
- Enter a value of the service label when RAM of the DC controller PCB has been cleared/the DC
controller has been replaced.
Adjustment range -3 to 5 [Factory default/After RAM clear: 0]
2
T-SPLY-M
Adjusting the amount of toner supply (M color)
Adjustment method
- Enter a value of the service label when RAM of the DC controller PCB has been cleared/the DC
controller has been replaced.
Adjustment range -3 to 5 [Factory default/After RAM clear: 0]
2
T-SPLY-C
Adjusting the amount of toner supply (C color)
Adjustment method
- Enter a value of the service label when RAM of the DC controller PCB has been cleared/the DC
controller has been replaced.
Adjustment range -3 to 5 [Factory default/After RAM clear: 0]
2
T-SPLY-K
Adjusting the amount of toner supply (K color)
Adjustment method
- Enter a value of the service label when RAM of the DC controller PCB has been cleared/the DC
controller has been replaced.
Adjustment range -3 to 5 [Factory default/After RAM clear: 0]
2
DMAX-Y/
M/C/K
Y/M/C/K colour density control target offset adjustment
Adjustment method
Sets offset value for Y/M/C/K colour density control target in 2D-MAX control.
Setting range: -8 to 8
[Factory settings and after RAM clear: 0]
2
P-ALPHA
Patch detection sensor P wave and S wave ratio: a
Adjusts a, the patch detection sensor P wave and S wave ratio.
Setting range: 512 to 2047
[Factory settings and after RAM clear: 1200]
1
P-K-Y
Patch density conversion coefficient: k (Y)
Adjusts k, the Y colour patch density conversion coefficient
Setting range: 0 to 2047
[Factory settings and after RAM clear: 500]
2
Summary of Contents for Color imageRUNNER C5180 Series
