Canon Color imageRUNNER C5180 Series, Service Manual

Page: 387 / 851

Chapter 10
10-60
10.10.24 Pre-Registration Motor
10.10.24.1 Preparation for Removing the
Pre-Registration Motor
1) Remove the manual feed unit. (page 10-
52) Reference[Removing the Manual Feed Unit]
2) Remove the manual feed unit cover. (page 12-
28) Reference[Removing the Manual Feed Unit
Cover]
3) Remove the motor cover.
3-1) Remove the motor cover [2] at the rear.
- screw [1]
F-10-127
10.10.24.2 Removing the Pre-Registration
Motor
1) Remove the pre-registration motor [3].
- connector [1]
- 2 screws [2]
F-10-128
When mounting the registration motor, be sure that
the belt is fitted to the gear of the motor shaft.
10.10.25 Horizontal Registration
Motor
10.10.25.1 Preparatiuon for Removing the
Horizontal Registration Motor
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.
(page 11-
38) Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.
(page 10-
63) Reference[Removing the Fixing/Feeder Unit]
3) Lift the duplexing open/close guide [3] in the
direction of [A] and shift it in the direction of [B].
Then, remove it.
- 1 connector [2] (Open sheet [1].)
F-10-129
[1] [2]
[1] [3]
[2]
[2]
[1]
[2]
[3]
[A]
[B]