Chapter 9
9-19
cover*1 open /
close
When the fixing roller surface temperature is =/> 100 deg C *2
ca. 20
When the fixing roller surface temperature is < 100 deg C
Yes
Yes
Yes
Yes
Yes
Yes
ca. 180 *7
specified
number of
sheet *10
4C counter *12: every cumulated output of 100 to under 200 sheets (last rotation) *3
Bk counter *12: every cumulated output of 200 to under 400 sheets (last rotation) *3, *13
Yes
Yes
Yes
(Yes: 300
sheets *9)
ca. 20 (30)
4C counter *12: every cumulated output of 100 to under 200 sheets (initial rotation) *3
Bk counter *12: every cumulated output of 200 to under 400 sheets (initial rotation) *3
Yes
Yes
ca. 15
4C counter *12: every 200 =/> sheets of cumulated output (interval) *3
Bk counter *12: every 400 =/> sheets of cumulated output (interval) *3, *12, *13
Yes
Yes
Yes
(Yes: 400
sheets *9)
ca. 30 (50)
500 =/> sheets of cumulated output *3
Yes
Yes
Yes
Yes
Yes
ca. 45 (70)
at detection of
significant
environmental
change after
being left for
10 hours in
STBY mode
*3.
Yes
Yes
Yes
Yes
Yes
Yes
ca. 100
recovery from
low-power
mode
When there is no open / close of cover during low-power mode
ca. 20 *4
When there is open / close of cover during low-power mode
Yes
Yes
Yes
ca. 70 *6
Operation
discharge
current
control
ATVC
control
ATR
control
SALT-
Dmax
control
image
position
correction
SALT-
Dhalf
control
time
required
[sec]
Summary of Contents for Color imageRUNNER C5180 Series
