Canon Color imageRUNNER C5180 Series, Service Manual, Page: 677 / 851

Chapter 19
19-32
P015
0 aligning plate R motor phase A signal
1 aligning plate R motor phase B signal
2 aligning pate R motor current switch I0 0: ON
3-7 not used
P016
0 aligning plate F motor phase A signal
1 aligning plate F motor phase B signal
2 aligning plate F motor current switch I0 0: ON
3-7 not used
P017
0 trailing edge assist motor phase A signal
1 trailing edge assist motor phase B signal
2 trailing edge assist motor current switch I0 0: ON
3 trailing edge assist motor current switch I1 0: ON
4 trailing edge assist motor standby signal 0: ON
5-7 not used
P018
0 stapler shift motor standby signal 0: ON
1 stapler motor direction switch CCW 1: ON
2 stapler motor direction switch CW 1: ON
3 not used
4 stapler shift motor phase A signal
5 stapler shift motor phase B signal
6-7 not used
P019
0 escape tray path sensor 1: paper present
1 escape tray full sensor 1: full
2 stapler HP detection 1: HP
3 stapler READY 1: ready
4 stapler LS 1: staple present
5 escape feed upper cover sensor 1: close
6 stapler shift HP sensor 1: HP
7 stapler alignment interference sensor 1: interference
P020
0 stapler shift motor current switch I0 0: ON
1 stapler shift motor current switch I1 0: ON
2 No. 1 delivery motor shift solenoid 1: ON
3 buffer trailing edge retaining solenoid 1: ON
4 stack edging lower roller clutch 1: ON
5 shutter open/close clutch 1: ON
6 stack edging motor current switch I1 0: ON
7 stack edging motor current switch I0 0: ON
P021
0 stack feeding motor phase A signal
1 stack edging motor phase B signal
2 stack feeding motor phase A* signal
3 stack edging motor phase B* signal
4 upper tray paper surface sensor 1: paper present
5 stapler interlock 1: open
6 shutter HP sensor 1: HP
7 swing guide interlock 1: open
Address bit Description Remarks