manualshive.com logo in svg

Canon 1730, Service Manual

The Canon 1730 Quick Manual is a comprehensive user guide for the Canon 1730 printer, providing step-by-step instructions for setup, operation, and troubleshooting. Users can conveniently download this manual for free from our website, ensuring they have the necessary information to optimize their printing experience.

Share
Download
background image

Main Controller System ---------------------------------------------------------- 5-4

Before Replacing the Main Controller PCB ------------------------------------------ 5-4
After Replacing the Main Controller PCB --------------------------------------------- 5-4
Before Replacing the DC Controller PCB -------------------------------------------- 5-5
After Replacing the DC Controller PCB ----------------------------------------------- 5-5
When Replacing the RAM PCB --------------------------------------------------------- 5-5

Laser Exposure System ---------------------------------------------------------- 5-5

After Replacing the Laser Scanner Unit ---------------------------------------------- 5-5

Image Position Adjustment -------------------------------------------------5-6

Left Edge Margin Adjustment --------------------------------------------------- 5-6
Leading Edge Non-image Width Adjustment ------------------------------- 5-6
Left Edge Non-image Width Adjustment ------------------------------------- 5-7
Image Position Adjustment for ADF ------------------------------------------- 5-8

Creation of Adjusting Test Sheet -------------------------------------------------------- 5-8
Squareness Adjustment ------------------------------------------------------------------- 5-8
Adjustment of Image Magnification Factor for Sub Scanning Section -------- 5-9
Horizontal Registration Adjustment ---------------------------------------------------5-10
Leading Edge Registration Adjustment ----------------------------------------------5-10

6

  Troubleshooting

Initial Check --------------------------------------------------------------------6-2

List of Initial Check Items -------------------------------------------------------- 6-2

Test Print ------------------------------------------------------------------------6-3

Overview ----------------------------------------------------------------------------- 6-3
Steps to Select a Test Print Type ---------------------------------------------- 6-3
How to View the Test Print ------------------------------------------------------- 6-4

Grid (TYPE=01) ----------------------------------------------------------------------------- 6-4
Halftone (TYPE=02) ----------------------------------------------------------------------- 6-4
Solid black (TYPE=03) -------------------------------------------------------------------- 6-5
Solid white (TYPE=04) -------------------------------------------------------------------- 6-5
4dot-6space / dot-6space (TYPE=06 / 07) ------------------------------------------- 6-6

Troubleshooting items -------------------------------------------------------6-7

List of Troubleshooting Items --------------------------------------------------- 6-7
Image Failure ----------------------------------------------------------------------- 6-7

Toner soiling at the back side of paper ------------------------------------------------ 6-7
Soiling at the leading/trailing edge of paper  ----------------------------------------- 6-7
Poor transfer of the image, hollow character ---------------------------------------- 6-8

Image smear/toner bleed/condensation ---------------------------------------------- 6-8
Large curl of paper ------------------------------------------------------------------------- 6-9
Paper jam in solid image when the leading edge margin is small (1 to 4mm)  --
6-9
Jam with thin paper (63g/cm2 or lighter) --------------------------------------------- 6-9
The toner bottle set lever cannot be operated or is hard to operate. ---------- 6-9
Abnormal noise at pickup from the Multi-purpose Tray  -------------------------6-10

Software to Be Upgraded and Upgrading Method ------------------ 6-11

Overview ---------------------------------------------------------------------------- 6-11
Procedure ---------------------------------------------------------------------------6-12

7

  Error Code

Overview ------------------------------------------------------------------------7-2

Outline -------------------------------------------------------------------------------- 7-2

Error Code ----------------------------------------------------------------------7-3

Error Code Details ----------------------------------------------------------------- 7-3
Error codes related to Fax ------------------------------------------------------7-10

Overview -------------------------------------------------------------------------------------7-10
User error codes ---------------------------------------------------------------------------7-10
Service error codes -----------------------------------------------------------------------7-10

Jam Code --------------------------------------------------------------------- 7-12

Main Unit ----------------------------------------------------------------------------7-12
ADF -----------------------------------------------------------------------------------7-13
Staple Finisher-H1 ----------------------------------------------------------------7-14

Alarm Code ------------------------------------------------------------------- 7-15

Alarm Code Details ---------------------------------------------------------------7-15

8

  Service Mode

Outline ---------------------------------------------------------------------------8-2

Outline of Service Mode ---------------------------------------------------------- 8-2
Using the Mode --------------------------------------------------------------------- 8-3
Setting of Bit Switch --------------------------------------------------------------- 8-3

Outline ----------------------------------------------------------------------------------------- 8-3

Back-Up ------------------------------------------------------------------------------ 8-4
Service Label ----------------------------------------------------------------------- 8-4

Details of Service Mode -----------------------------------------------------8-5

Summary of Contents for 1730







































































































































































































































































































































































Reviews:

No comments

Related manuals for 1730

Xerox 4050 Operator'S Manual preview
4050
Brand: Xerox Pages: 168
Xerox 4050 Reference Manual preview
4050
Brand: Xerox Pages: 36
Xerox 4050 Installation Planning preview
4050
Brand: Xerox Pages: 64
Xerox 4050 Maintenance Manual preview
4050
Brand: Xerox Pages: 54
Xerox 4050 Quick Reference Card preview
4050
Brand: Xerox Pages: 2
Xerox 4050 Message Manual preview
4050
Brand: Xerox Pages: 115
quadient DS-200iQ User Manual preview
DS-200iQ
Brand: quadient Pages: 130
Oki PAGE 8w Lite Setup Manual preview
PAGE 8w Lite
Brand: Oki Pages: 18
Telpar SP-401 Series User Manual preview
SP-401 Series
Brand: Telpar Pages: 25
Brady BradyPrinter A5500 User Manual preview
BradyPrinter A5500
Brand: Brady Pages: 72
DNP DS-ID400 Settings Manual preview
DS-ID400
Brand: DNP Pages: 10
Roland VersaUV LEF2-300 Service Notes preview
VersaUV LEF2-300
Brand: Roland Pages: 264
Xerox VersaLink B625 User Manual preview
VersaLink B625
Brand: Xerox Pages: 342
Canon PIXMA MP268 Getting Started preview
PIXMA MP268
Brand: Canon Pages: 37
Canon PIXMA MG6170 Getting Started preview
PIXMA MG6170
Brand: Canon Pages: 83
Canon Pixma MG6821 Online Manual preview
Pixma MG6821
Brand: Canon Pages: 1068
Canon PIXMA MG6440 Manual preview
PIXMA MG6440
Brand: Canon Pages: 4
Epson Stylus CX1500 Notices And Warranty preview
Stylus CX1500
Brand: Epson Pages: 24

Brands by name

Popular brands

Load more brands