Canon 1730, Service Manual

Page: 102 / 358

2
2
2-74
2-74
Technical Explanation > External Auxiliary System > Controls > Power supply
Technical Explanation > External Auxiliary System > Controls > Power supply
● Power supply connection with the options
Staple Finisher
Reader/ADF
Wiring inside
the machine
Drawer
Connector
Cassette Pedestal
NOTE:
With this machine, Reader and ADF are installed as standard.
The drawer connectors connect the Staple Finisher and cassette Pedestals.
An external cable is used to connect to ADF.
F-2-107
● Energy Saving Function
Energy-saving
mode
Sleep 1
Standby
mode
Sleep 2
- Press of energy-saving key
- Detection of off-hook
- Occurrence of service call
Press of
power switch on
control panel
- Occurrence of job
- Occurrence of service call
- Press of energy-saving key
- Lapse of 5 seconds
after completion of job
- 5 seconds after
completion of job or
network communication
- Network, alarm, FAX reception
- Press of power switch on
control panel
[Standby mode]
The mode that can start operation immediately and all the power is supplied in this mode.
[Energy saver mode]
The mode to turn OFF just the back light of the Control Panel LCD. The mode is changed by
pressing the Energy Saver key with the auto sleep timer in user mode.
[Sleep 1]
No power is supplied to the engine although the power is supplied to the Controller.
[Sleep 2]
No power is supplied to the Controller.
The mode is changed from Sleep 2 to Sleep 1 under the following conditions:
- Print job
- Holding down the Control Panel Power Switch
- Fax reception
- Off-hook detection
F-2-108