Canon 1730, Service Manual

Page: 317 / 358

9
9
9-9
9-9
Installation > Drum Heater-D1 > Installation Procedure > Installing the Environment Drum Heater
Installation > Drum Heater-D1 > Installation Procedure > Installing the Environment Drum Heater
NOTE:
• After installing the Power Switch Arm [1], be sure to check that the switch on the PCB
works by operating the Power Switch [2].
• Be sure to set the Power Switch at OFF position.
[2]
[1]
F-9-24
3) Connect the Fixing Connector [1].
[1]
F-9-25
4) Connect one of the connectors [1] of the Environment Heater Harness, and pass the other
connector [2] through the opening [A] of the plate and into the inside of the Host Machine [B].
CAUTION:
Be sure not to touch the surface of the Transfer Roller.
F-9-26
NOTE:
Remove the Fixing Assembly and Right Door Unit to improve the operability.
[1]
[2]
[A]
[A]
[B]
[2]
F-9-27