Canon 1730, Service Manual

Page: 261 / 358

8
8
8-12
8-12
Service Mode > Details of Service Mode > #SSSW > Details
Service Mode > Details of Service Mode > #SSSW > Details
Detailed Discussions of Bit 5
Select whether to display the toner cartridge replacement counter.
When "1" is selected, the counter is displayed.
When "0" is selected, the counter is not displayed.
● SSSW-SW34
List of Functions
Bit Function 1 0
0 Display the waste toner full warning Yes No
1 Switch the waste toner full warning
Drum replacement required
message displayed on an
operator call
E019 displayed on
an service call
2 User drum replacement menu display Yes No
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 not used - -
Detailed Discussions of Bit 0
You can select whether a waste toner full warning is to be displayed.
When "1" is selected, a waste toner full warning is displayed.
When "0" is selected, a waste toner full warning is not displayed.
Detailed Discussions of Bit 1
Select whether to display the waste toner full warning as a drum replacement required
message or as E019 displayed on an operator call. Select 1 to display a rum replacement
required message on an operator call. Select 0 to display E019 on an service call.
T-8-23
Detailed Discussions of Bit 2
Select whether to display the user drum replacement menu.
When "1" is selected, the menu is displayed.
When "0" is selected, the menu is not displayed.
● SSSW-SW35
List of Functions
Bit Function 1 0
0 e-RDS function ON/OFF Yes No
1 not used - -
2 ScanToMeia function enable/disable enable disable
3 MediaPrint function enable/disable enable disable
4 IC card authentication management function ON/OFFYes No
5 Handling of a scan job at device logout
Default: 0
Stop a scan job Not stop a scan job
6
Handling of display of the stop confirmation screen
when the stop key is pressed during a scan job,
except remote scan
Not display the stop
confirmation screen
(same specification
as that of the
existing models)
Display the stop
confirmation
screen (the display
specification following
that of the iR series)
7
Switching to display/hide the start button of the
counter print (known as billing counter report)
Default: 1
Display the counter
print button
Hide the counter print
button
Detailed Discussions of Bit 0
Select whether to set the e-RDS function.
When "1" is selected, the function is set.
When "0" is selected, the function is not set.
Detailed Discussions of Bit 2
Select whether to enable or disable the ScanToMeia function.
When "1" is selected, the function is enabled.
When "0" is selected, the function is disabled.
Detailed Discussions of Bit 3
Select whether to enable the MediaPrint function.
When "1" is selected, the function is enabled.
When "0" is selected, the function is disabled.
T-8-24