AFX SERIES® OPERATION MANUAL
SECTION 8:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS)
• All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 216 of 402
Command Syntax
PROGram[:SELected]:DEFine [<nr1>,] [<cr>,] <cr>
Description
This command programs all values stored in the selected program
number. Both steady-state and transient segment parameter names
and values may be sent. Program parameters are defined in the
following sections.
NOTE: Only commas may separate the values, NO Carriage Returns or
Line Feeds may separate the values within a single command message.
Parameters
Option: PROGRAM, NUMBER [,<cr>} or [,<nr1>]
Option: MEMORY [,<cr>] – Available are: INTERNAL | RAM | USB
Parameter list define string <cr>,<cr>,….,<cr>
Steady State list
FORM,<n>,
COUPLing,<s>,
XFMRRATIO,<n.nn>,
FREQuency,<n>,
VOLTage,<n>,
see Convention #13.
VOLTage1,<n>,
VOLTage2,<n>,
VOLTage3,<n>,
CURRent:LIMit,<n>,
CURRent:PROTect:LEVel,<n>
CURRent:PROTect:TOUT,<n>
PHASe2,<n>,
PHASe3,<n>,
WAVEFORM,<n>,
see Convention #13.
WAVEFORM1,<n>,
WAVEFORM2,<n>,
WAVEFORM3,<n>,
EVENTS,<n>,
AUTORMS,<n>
NSEGS, <n>
Optional Transient Segment
list
SEGment,<n>,
Multiple segments per Program Message may
be sent, see Convention 17
FSEG,<n>,
VSEG,<n>,
see Convention #13.
VSEG1,<n>,
VSEG2,<n>,
VSEG3,<n>,
WFSEG,<n>
see Convention #13.
WFSEG1,<n>,
WFSEG2,<n>,
WFSEG3,<n>,
TSEG,<n>,
LAST
Sent only if this is the LAST segment.
Parameter Format
<cr>,<cr>,….,<cr>,<cr>
Example
Query Format
PROGram[:SELected]:DEFine? [<nr1>,] [<cr>,]
Description
The Query format returns steady-state values of selected program and
segment values of most recently selected segment or multiple
segments if specified by a previous NSEGS parameter. "LAST" is
returned with segment data if the segment is the last segment in the
program.
Returned Data Format
Refer to parameter lists shown above
Query Example
PROG:DEF? 6
<nr1>, <cr>,….,<cr>
