Caltest LXI AFX Series, Manual

Page: 242 / 402

AFX SERIES® OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS)
• All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual Page 242 of 402
Command Syntax [SOURce:]VOLTage[:AC]#
Description Sets AC voltage for phase #. If # is omitted, sets all available phases to
value specified.
Parameters Range 0.0000 - 300.0000
Parameter Format <nr2>
Example VOLT:AC1 100.00
Query Format [SOURce:]VOLTage[:AC]#?
Description Returns voltage setting for specified phase. If phase is omitted,
returns voltage setting for phase A.
Returned Data Format <nr2>
Query Example VOLT:AC1?
100.0000
Command Syntax [SOURce:]VOLTage[:AC]#:SLEW
Description Sets AC voltage slew rate for phase # in Volts per msec. If # is
omitted, sets phase A slew rate to value specified.
Parameters Range 0.01 – 300.0
Parameter Format <nr2> and <nr3>
Example VOLT:AC1:SLEW 300.00
Query Format [SOURce:]VOLTage[:AC]#:SLEW?
Description Returns voltage slew rate setting for specified phase. If phase is
omitted, returns voltage setting for phase A.
Returned Data Format <nr2>
Query Example VOLT:AC1:SLEW?
300.0000
Command Syntax [SOURce:]VOLTage[:AC]:LIMit:MINimum
Description Sets low user limit for AC voltage programming. User limits must fall
within actual hardware limits of the power source. Also, MIN limit
must be less than MAX limit.
Parameters 0.000 – 300.000
Parameter Format <nr2>
Example VOLT:LIM:MIN 20.0
Query Format [SOURce:]VOLTage[:AC]#:LIMit:MINimum?
Returned Data Format <nr2>
Query Example VOLT:LIM:MIN?
20.0000