CAI 700 NDIR, Operator'S Manual

Page: 170 / 205

700 NDIR Analyzer 6-20-2017
170
EH2O: Set H2O Correction Factor s
Command Response Description
_EH2O_Km_z.z_y.y_x.x _EH2O_s Set H2O correction factors for channel m.
z.z = Dry
yy = 1
st
order coefficient
x.x =2
nd
order coefficient
EKAK: Set the Four Span Gas Concentration Values
Command Response Description
_EKAK_Km_M1_
w.w_M2_x.x_M3_
y.y_M4_z.z
_EKAK_s Set the span gas values for channel m.
EKEN: Set New Device Identification Name
Command Response Description
_EKEN_K0_new
device name
_EKEN_s Set new device identification name.
Maximum length 40 characters
NOTE: To change device identification, you must first rename the device to “RESET”.
Now a name up to 40 letters can be given.
NOTE: The device name must not have any blanks between, f.e. “CAI CLD” is not allowed. You
can use undersline, i.e. “CAI_NDIR”.
EMBE: Set the Four Measuring Range Full Scale Limits
Command Response Description
_EMBE_Km_M1_
w.w_M2_x.x_M3_
y.y_M4_z.z
_EMBE_s Set the full scale range limits for channel m.