CAI 700 NDIR, Operator'S Manual

Page: 60 / 205

700 NDIR Analyzer 6-20-2017
60
Auto Calibration/Check
→ → → →
Auto Calibration/Check lets the operator select whether the analyzer actually
calibrates, or performs a check of the calibration. To access the Auto Cal/Check
menu, press from the Calibration Setup menu. The current setting is shown on the
upper-right corner of the screen.
Press to set the analyzer parameter to Calibrate. This setting will be saved and the
analyzer will return to the Calibration Setup menu. The Calibration Setup menu shows
the current setting on the right side of the screen after the ellipsis (. . .).
Example: Auto Cal/Check . . . Cal.
Press to set the analyzer parameter to Check. The setting will be saved and the
analyzer will return to the Calibration Setup menu. The Calibration Setup menu shows
the current setting on the right side of the screen after the ellipsis (. . .).
Example: Auto Cal/Check . . . Check.