CAI 700 NDIR, Operator'S Manual

Page: 114 / 205

700 NDIR Analyzer 6-20-2017
114
Output Hold/Clear
→ → → → →
The Output Hold/Clear menu allows the operator to choose whether to hold or clear a
triggered alarm when the alarm is no longer present. The current status is shown in the
upper-right corner of the Output Hold/Clear menu. The Output Hold/Clear menu is accessed by
pressing from the Programmable Digitals menu.
Press to hold programmed alarm outputs until they are manually cleared.
Press to set the outputs to automatically clear when alarms are no longer present.
NOTES:

To manually clear held alarms, press from this menu. An output alarm cannot be
cleared until the alarm is back within its limits.

Once the outputs are cleared, the outputs will not hold on alarms until they are set back to
Hold.