217 . . .
–
Section
1
Heated Washer Fluid (If
equipped)
Push the heated washer fluid
button, located on the Heating
and Air Conditioning System
control panel, to activate the
heated washer fluid system.
The following message will appear
in the Driver Information Center
display:
•
HEATED WASHER FLUID
WASH WIPES PENDING
After you push the button, the first
heated wash/wipe cycle may be
delayed as long as 40 seconds
depending on the outside
temperature. A 20-second interval
may occur between the remaining
cycles.
The heated washer fluid system
will complete four heated wash/
wipe cycles and then turn off.
To turn the system off before four
cycles are completed, press the
heated washer fluid button again.
The following message will appear
in the Driver Information Center
display:
•
HEATED WASHER FLUID
SYSTEM OFF
When the system is activated
under some outside conditions,
steam may flow out of the washer
nozzles before the washer fluid is
sprayed. This is normal.
If the washer fluid reservoir is low
on fluid,
WASHER FLUID LOW
ADD FLUID
will appear on the
Driver Information Center display.
See "Driver Information Center
Messages" earlier in this section for
more information.
AKENG40_CTS Page 217 Wednesday, July 23, 2008 11:47 AM
