151 . . .
–
Section
1
Regionalization
If this feature is enabled, the
alternate frequency changes are
limited by the program
identification code.
1. Press the
CONFIG
(configure)
button to display the radio
setup menu.
2. Press the push-button under
RDS
(radio data system) to
display the RDS menu.
The RDS configuration options
will appear on the display.
3. Press the push-button under
REGION
(regionalization) to
toggle between modes.
You may choose one of the
following two modes:
-
REGIONALIZATION: ON
In this mode, the radio will
switch to a station with the
same program identification
code unless the signal quality
falls below an acceptable
level.
If the signal is weak, the radio
will switch to a station with
the best regional program
identification code.
-
REGIONALIZATION: OFF
The radio will not switch to
other stations.
To return to the original
display, press the
BACK
button or just wait for the
display to time out.
AKENG40_CTS Page 151 Wednesday, July 23, 2008 11:47 AM