
TCi Operator Manual
42
5 Data Analysis techniques and practices
5.1
Opening a Test
An opened test appears the same as a test being performed with the exception of the test control
button field, which is not displayed.
Step 1 - Click the Open Test button on the toolbar/in the main menu.
Step 2 - Enter keywords into the query fields and click the OK button.
Once the test is open, the project and material information can be edited.
5.2
Using Excel for added Analysis Power
Test data can be copied to Excel by copying to the clipboard or exporting to a CSV file that can
be then imported to Excel. See the Importing and Exporting section for more information.
5.2.1 Copying to the Clipboard
Step 1 – Open the desired table or test results.
Step 2 – Right-click an entry in the table.
Step 3 – Select the Copy Grid to Clipboard option.
Step 4 – Paste the table into Excel.
5.3
Overlaying Measurements/Tests
Individual samples can be overlaid on a voltage time chart. Overlaying samples allows a
deviation point to be found.
Step 1 - Open the test results table.
Step 2 – Open the desired test
Step 3 – Right-click on one measurement.
Step 4 – Select the Overlay Voltage Chart option.
Step 5 – Right-click a second measurement.
Note: The second measurement may be from a different test than the first.
Step 6 – Select the Overlay option.
5.4
Editing a Test
The project, material lot, and description of a test can be edited after the test has been
performed.
Step 1 – Open the test results table.
Step 2 – Open the desired test.
Summary of Contents for TCi
Page 1: ...C Therm TCi Operator Manual TH130041 Rev H...
Page 2: ......
Page 6: ...TCi Operator Manual vi...
Page 53: ...TCi Operator Manual 47 Step 3 Click the Import button...